QuickJet® Diaphragm Check Valve Nozzle Body

Diaphragm Check Valve Nozzle Body

QuickJet® Nozzle Body

QuickJet® Split-Eyelet Nozzle Body

QuickJet® Split Eyelet Diaphragm Check Valve Nozzle Body

UniJet® Diaphragm Check Valve Nozzle Body

Outlet Connection Gender

Our products are grouped into these primary product types:
- Nozzle - Body _(a nozzle body without a spray tip)_
- Tip _(a spray tip without a nozzle body)_
- Assembly _(a complete nozzle assembly including both a nozzle body and a spray tip)_

Product Type

Spray nozzles are manufactured from a wide variety of materials that have been determined to meet the usual requirements of the applications most commonly associated with that type of nozzle. Standard materials include brass, steel, various stainless steels, hardened stainless steels, many plastics and various carbides. Spray nozzles can also be supplied in other materials upon special request. Materials of construction affect nozzle wear life and resistance to corrosion and abrasion.
> _For more information on nozzle materials, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Material Composition

Outlet Connection Size

QuickMist® Quick Connect Air Atomizing Nozzles

Electrically-Actuated / Hydraulic Atomizing

Throttling and Pressure Relief/Regulating Valves

* A quick and easy way to connect UniJet® spray nozzles to piping systems
    * Drill a hole in side of pipe
    * Place inlet of split eyelet into the hole – the seal eliminates leaking
    * Assemble the clamp component to secure the assembly to the pipe
* Maximum pressure: up to 150 psi (10.4 bar)

UniJet® Split-Eyelet Nozzle Body, 25775

General Information

Description

Specification Summary

Alternative Models