JKI Drift Reduction Rating

Fertilizer Banding

The largest interior tank diameter (measured in feet or meters) for which a specific TankJet nozzle should be used.

Maximum Recommended Tank Diameter

Actual drop size (measured in microns) will vary based on flow rate and pressure. The _**“relative”**_ drop size range represents the variation in drop size across typical operating pressures for a particular nozzle.
> _If drop size is critical to your application, contact us for specific information. For basic information on drop size terminology, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Relative Drop Size Range

Maximum Transverse Spray Coverage Width Horizontal Spray

Motor Cables

Nozzle Hub Drive

Actual drop size (measured in microns) will vary based on flow rate and pressure. The _**“relative”**_ drop size range represents the variation in drop size across typical operating pressures for a particular nozzle.

The drop size ranges provided can be characterized as follows:
- 10 to 500 microns: very small drops
(comparable to fog)
- 100 to 500 microns: small drops
(comparable to light rain)
- 500 to 1000 microns: medium drops
(comparable to moderate rain)
- 1000 to 5000 microns: large drops
(comparable to heavy rain)

> _If drop size is critical to your application, contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

> _For basic information on drop size terminology, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Relative Drop Size Group

Formula

Maximum Pressure With Advanced AutoJet Controllers

Provided for flat spray nozzles with elliptical orifices. It is the diameter of a circular orifice that would pass the same flow.

Equivalent Orifice Diameter

Minimum Pressure

Mounting Points

Answercode to a specific question

Flats

Has Guide Vane

Set-up Sales Part Number

Fluid Cap Part Number

Cap Hex Size

Miniumum Cylinder Air Pressure

The volume of liquid passing through a nozzle (also called the nozzle’s capacity) is typically measured in gallons per minute or liters per minute. Flow rate is affected by liquid pressure and other factors, including the specific gravity and viscosity of the liquid being sprayed.
> _For more information on liquid flow rate or nozzle capacity, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Liquid Flow Rate

Mounting Type

Length At Maximum Opening Height

Sanitary Standard

Descriptive Product Type

Siphon Inlet Connection Size

Number Of Spray Outlets

Electrical Side Spare Part Kit

Mesh size relates to the particle size that will be filtered by a strainer. Because the purpose of a liquid strainer is to prevent nozzle plugging it’s important to choose a mesh size that will screen out particulates larger than the nozzle’s orifice will allow to pass.
> _For help selecting the right strainer mesh size for your application, contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Strainer Screen Mesh Size

Motor Version

A Dimension

Finish Coating

Anti-Bearding Set-Up

Maximum Temperature

Spray products that are recirculating allow the sprayed liquid to flow back to the liquid source

Is Recirculating

Products that are designated as "Food Contact" are constructed from materials that are compliant for food contact

Is Food Contact

Clamp Sales Part Number

Check Valve Mount Side

GunJet spray guns and accessories are available with various outlets, including NPT or BSPT threaded outlets, UniJet threaded outlets (11/16-16) and quick-connect outlets.

Outlet Connection Type

Cylinder Behavior

Orifice discs and cores are used in some UniJet® full cone and hollow cone nozzles to control spray characteristics. Each disc and core pairing provides an unique and different combination of flow rate, spray angle and spray pattern.

Orifice Disc Number And Core Number

Is Temperature Controlled

Mesh Size

Maximum Pump Head

Operating Pressure Range

Outlet Connection Thread Type

Orifice Number

Orifice Type

Amperage

The nozzle height is set to ensure the optimal spray pattern overlap, which is necessary for uniform coverage based on the spacing of the nozzles across the spray boom.

Optimum Spray Height (Height @ Spacing)

Approximate Spray Pattern Diameter

Inner Clamp Sales Part Number

Boom Diameter

Navigation Configuration

Minimum Tank Opening

Maximum Free Passage

C Dimension

Pipe Size To Clamp On

Motor Specifications

JKI Certification Number

Application Rate For Three Tips

Air Volume at Outlet

Cycle Time

Extension Length

Mesh Opening

Weight

The QuickJet® and UniJet® Nozzle Systems provide nozzle bodies with interchangeable spray tips. QuickJet bodies and tips are designated with “Q” as the first letter in the part number and offer quick-connect convenience with automatic spray pattern alignment. UniJet bodies and tips use a threaded retaining cap to complete the assembly. Both QuickJet and UniJet nozzles are available in a wide variety of spray patterns, flow rates and materials of construction.

Tip Type

Gearbox Type

Has Cleanout Needle

Horizontal Spray Coverage Length Horizontal Spray

Antenna Type

LERAPS Drift Reduction Rating

Drop Size

Application

Application Rate

Air Flow Rate

Dense Spray Coverage Diameter

Spray Coverage refers to the portion of the vessel to be cleaned. TankJet nozzles offering full 360° coverage clean all interior tank surfaces. For vessels with an open top, TankJet nozzles with 180° downward coverage are available. Other coverage patterns are also available.

Spray Coverage

Circulation Rate

Estimated Ready to Ship

Nozzle Count

Atomizing Air Flow Rate

Extension Options

Tip Style Or Setup

Core Number

Shutoff Type for Position 1

Includes Harness

Threaded nozzles are typically offered with tapered pipe threads. NPT and BSPT threads are the most common. Other thread types are available for selected nozzles.

Inlet Connection Thread Type

Cable Length

Body Sales Part Number

Is Cast

O-Ring Type

Herbicide Systemic

Amplification Ratio

Boom Status

Insecticide Systemic

Liquid Flow Rate For Two Tips

Herbicide Soil Applied

Power

Materials

UniJet® Split-Eyelet Nozzle Body

https://ssco-portal-aais-usc.search.windows.net/indexes('prod-ind-main-us-en-product-facets')/$metadata#docs(*)

QuickMist® Quick Connect Air Atomizing Nozzles

Electrically-Actuated / Hydraulic Atomizing

Throttling and Pressure Relief/Regulating Valves

Hydraulic spray nozzles are precision components designed to yield very specific performance under specific conditions. They are available with specific spray patterns and they’re used for industrial operations such as cooling, coating, cleaning, lubricating, dust control and fire protection.

Hydraulic Nozzles

Air atomizing nozzles (also called "two-fluid" nozzles) produce the smallest drops of any nozzle type, using compressed air as the force for atomization. Air atomizing nozzles are critical for applications ranging from coating and cooling to dust suppression, gas cooling, lubricating and more. Our air atomizing product line is the largest in the industry.

Air Atomizing Spray Nozzles

Cloud-Sellers® and TankJet® automated tank cleaning products are available to clean any vessel in your facility. Tanks ranging in size from as small as 3 ft. (0.9 m) up to as large as 100 ft. (30.5 m) in diameter can be effectively cleaned. Cloud-Sellers® and TankJet® units are suitable for gentle rinsing to high-impact cleaning to remove stubborn residues. Sanitary designs that meet 3A standards and ATEX-certified designs are available.

Tank Cleaning Nozzles

Dozens of automatic nozzles are available to provide accurate intermittent spraying and to provide precise control of spray performance. Electrically-actuated and air-actuated nozzles are both available. Models which atomize flow using liquid pressure only or using compressed air are both offered. AutoJet® Spray Controllers can be added to optimize performance by adjusting flow rate for line speed variations and fine-tuning timing to accurately spray moving targets. 

Automatic Spray Nozzles

Dozens of GunJet® handheld spray guns are available for all types of cleaning and rinsing applications. Options range from gentle, low pressure spray to high impact, high pressure performance. Ergonomic designs assure positive control and operator comfort even at maximum flow and pressure conditions. Sturdy design and materials mean long, productive equipment life. A complete line of accessories, including extensions, adapters and swivel connectors are available.

Spray Guns

WindJet® air nozzles are widely used for moving materials and for cleaning, drying and cooling parts. They convert a low-pressure volume of compressed air into a targeted high-velocity concentrated air stream and are available with variety of capacities and materials. WindJet air nozzles provide a significant reduction in compressed air consumption compared to open pipes.

Air Nozzles

Spraying Systems Co. offers a complete line of connectors, fittings, valves and strainers to ensure peak spray performance. The proper accessories help ensure quick installation, effective monitoring and easy maintenance. Plus, purchasing all the components from the same supplier saves time and eliminates any potential issues with integration and compatibility.

Accessories

There’s a reason why all major industries know the names of our spray nozzles and automated systems. Their consistent performance has helped our customers improve product quality and efficiency for decades. Spraying Systems Co. offers a top-brand solution for every type of spray operation.

Spraying Systems Co. Brands

Hundreds of industrial manufacturing and processing operations can be performed with spray technology. We’ve developed spray nozzles and related products to address a wide range of applications, across all major industries.

Applications

Industries

SprayFinder®

Model

Materials

Browse all products