Electrically-Actuated Air Atomizing Nozzle with Flow up to 0.75 gpm (uses J Set-Ups), Max Speed 5,000 cpm

Electrically-Actuated Air Atomizing Nozzle with Flow up to 0.42 gpm (uses JJ Set-Ups), Quick Change Fluid Module and Max Speed 2,000 cpm

Electrically-Actuated Air Atomizing Nozzle with Flow up to 0.75 gpm (uses J Set-Ups), Max Speed 1,000 cpm

Maximum Pressure With Advanced AutoJet Controllers

Maximum Flow

Maximum Pressure

Our products are grouped into these primary product types:
- Nozzle - Body _(a nozzle body without a spray tip)_
- Tip _(a spray tip without a nozzle body)_
- Assembly _(a complete nozzle assembly including both a nozzle body and a spray tip)_

Product Type

Spray nozzles are manufactured from a wide variety of materials that have been determined to meet the usual requirements of the applications most commonly associated with that type of nozzle. Standard materials include brass, steel, various stainless steels, hardened stainless steels, many plastics and various carbides. Spray nozzles can also be supplied in other materials upon special request. Materials of construction affect nozzle wear life and resistance to corrosion and abrasion.
> _For more information on nozzle materials, download our [technical reference document](https://spray.widen.net/download/spray/oeafrrites/cat75HYD_us_Tech-Reference_A.pdf) or contact your [local Spraying Systems Co. sales rep](https://www.spray.com/contact/find-a-representative)._

Material Composition

Threaded nozzles are available with male (external) threads or female (internal) threads.

Inlet Connection Gender

Voltage

Maximum Operating Speed

QuickMist® Quick Connect Air Atomizing Nozzles

Electrically-Actuated / Hydraulic Atomizing

Throttling and Pressure Relief/Regulating Valves

* Rear liquid inlet; side air inlet
* Flow rates up to 0.16 gpm (0.61 lpm)
* Stainless steel, PPS and PEEK construction with Viton® or EPDM seals
* All wear parts accessible from the front of the nozzle without disturbing mounting and air/liquid/ electrical connections
* For use with standard 1/8JJ air caps and 1/8JJ fluid caps (maximum size 2850)

Electrically-Actuated Air Atomizing Nozzle with Flow up to 0.16 gpm (uses JJ Set-Ups),Max Speed 10,000 cpm

Electrically-Actuated / Air Atomizing nozzles use compressed air as the force for atomization, producing the smallest drop sizes and lowest possible flow rates along with fast cycling – up to 10,000 cycles per minute. Hundreds of air atomizing set-ups are available for a wide variety of spray patterns and flow rates. Many options are available for convenient mounting, clean-out needles, food grade materials of construction and more. Precision Spray Control using an AutoJet® Spray Controller ensures consistent flow rates at varying line speeds.

Electrically-Actuated Air Atomizing Nozzle with Flow up to 0.16 gpm (uses JJ Set-Ups),Max Speed 10,000 cpm, AA10000JJAU

General Information

Description

Specification Summary

Alternative Models